Web Analytics Made Easy - StatCounter

Earth Wire Clamp Tenders

Get complete information related to latest Earth Wire Clamp Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Earth Wire Clamp Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Earth Wire Clamp Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45709845 Due date: 20 Jul, 202620 Jul, 2026 NA
Tender For supply of jublee clamp stainless steel size 10 inch (250mm) is 6911:2017 for fixing air bellows of tm1400 hp demu,tw,memu mc. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45722151 Due date: 14 Jul, 202614 Jul, 2026 1.51 Crore
Tender For supply of supply of jointing kit suitable for 3.5cx240 sqmm lt cable,supply of 11 kv cable jointing kit suitable for 3x185 sqmm,supply of 11 kv cable jointing kit streight through 3x185 sqmm,supply of 33 kv od jointing kit,supply of 33 kv cable jointing kit streight through,supply of 150 mm hdpe pipe size 4x80 m,supply of cable crossing details board,supply of clamp for gi pipe 6 inch dia with nut and bolts,supply of clamp for 11 kv cross arm with nut and bolts,supply of clamp for 33 kv cross arm with nut and bolts,supply of earth wire clamp with bolts and nuts,supply of gi barbed wire,supply of cable route markers,supply of ms angle iron 65x65x6mm 4300 mm long bracing,supply of stone pad,supply of top channel ms 100x50x2240mm,supply of top channel 125by65mm,supply of clamp for top channel,supply of danger board with clamp for 0.440 kv 11 kv 33 kv,supply of pg clamps,supply of number plate,supply of bolts nut and washers all sizes,supply of shackle insulator for lt with clamp,supply of dead end with i hook for pcc,supp

CTN :45662043 Due date: 07 Jul, 202607 Jul, 2026 44.41 Lacs
Tender For running contract for deposit works under edd-jaisinghpur, sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., pg clamp, guarding angle clamp., barbed wire g.i., stay loop insulator/guy insulator., bolts, nuts & washers all sizes., l.t. connector (pearcing)., gi pipe 6" dia, hdpe pipe 120mm., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 09 mtr. long., safe carriage of stp 11 mtr. long., safe carriage of pcc pole 8.5 mtr. long., safe carriage of pcc pole 09 mtr. long., safe carriage of pcc pole 11 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of acsr rabbit conductor., safe carriage of 11 kv xlpe cable al. 3x70/3x120/3x185/3x240 sq.mm., safe carriage of lt abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 10/16/25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp 09 mtr. long from site to pit point., dragging of stp 11 mtr. from site to pit point., dragging of pcc pole 8.5 mtr. from site to pit point., dragging of pcc pole 09 mtr. from site to pit point., dragging of pcc pole 11 mtr. from site to pit point., fabrication & erection of single pole support on st pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on st pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 8.5 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 8.5 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., stay complete with concreating as per respo norms., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc as per respo norms., laying stringing & sagging of new acsr rabbit conductor including binding jumpering etc as per respo norms., digging of trench & laying of cable 11 kv xlpe cable 3x70/3x120/3x185/3x240 sq.mm including sands & brick as per respo norms., laying of cable with hdd method using with hdpe pipe (120mm od pn-4 pe 80 grade uv stabilized hdpe pipe as per is: 4984 of 6 metre) 11 kv xlpe cable 3x70/3x120/3x185/3x240 sq.mm as per respo norms., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x70/3x120/3x185/3x240 sq.mm xlpe 11 kv cable (cost

CTN :45662051 Due date: 07 Jul, 202607 Jul, 2026 28.30 Lacs
Tender For running contract for deposit works under edd-baldirai, sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., pg clamp, guarding angle clamp., barbed wire g.i., stay loop insulator/guy insulator., bolts, nuts & washers all sizes., l.t. connector (pearcing)., gi pipe 6" dia, hdpe pipe 120mm., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 09 mtr. long., safe carriage of stp 11 mtr. long., safe carriage of pcc pole 8.5 mtr. long., safe carriage of pcc pole 09 mtr. long., safe carriage of pcc pole 11 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of acsr rabbit conductor., safe carriage of 11 kv xlpe cable al. 3x70/3x120/3x185/3x240 sq.mm., safe carriage of lt abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 10/16/25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp 09 mtr. long from site to pit point., dragging of stp 11 mtr. from site to pit point., dragging of pcc pole 8.5 mtr. from site to pit point., dragging of pcc pole 09 mtr. from site to pit point., dragging of pcc pole 11 mtr. from site to pit point., fabrication & erection of single pole support on st pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on st pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 8.5 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 8.5 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., stay complete with concreating as per respo norms., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc as per respo norms., laying stringing & sagging of new acsr rabbit conductor including binding jumpering etc as per respo norms., digging of trench & laying of cable 11 kv xlpe cable 3x70/3x120/3x185/3x240 sq.mm including sands & brick as per respo norms., laying of cable with hdd method using with hdpe pipe (120mm od pn-4 pe 80 grade uv stabilized hdpe pipe as per is: 4984 of 6 metre) 11 kv xlpe cable 3x70/3x120/3x185/3x240 sq.mm as per respo norms., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x70/3x120/3x185/3x240

corporations/Associations/Others

CTN :45445697 Due date: 19 Jun, 202619 Jun, 2026 15.14 Lacs
Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on "semi turnkey basis" under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as jointing sleeve binding wire, armour rod etc.

Central Government And Public Sector

CTN :44846008 Due date: 03 Jun, 202603 Jun, 2026 NA
Tender For bid to ras corrigendum : supply of 3m double sided tape 1 inch 10 ft roll , aeroshell w 100 oil sae j 1899 grade 50 , aeroshell w 120 oil sae j 1899 grade 60 , engine cleaning spray gun , baniyan cloth roll 12 inch width 100 percent cotton 150gsm , microfiber cleaning cloth 40x40cms 250 gsm , battery by cell size a , battery duracell 9 volt , brasso metal polish can , cable tie white 100 pcs pack 100x2.8 mm , cable tie white 100 pcs pack 150x4 mm , cable tie white 100 pcs pack 200x4.8 mm , cable tie white 100 pcs pack 350x4.8 mm , cello tape 1 inch 50 meter roll , cello tape 2 inch 50 meter roll , paint brush 1 inch , paint brush half inch , paint brush 2 inch , crow foot set 3 by 8 inch to 1 inch 3 by 8 inch drive , devcon aluminium putty 500 gram , digital tyre pressure gauge 0 to 1000 psi with flexible hose , duracell cr 2032 battery , duracell lr 44 battery , ethyle methyl ketone 2.5 liter bottle , feather duster , fevibond 25 ml tube adhesive , fuel sample bottle steel lid 250 ml , glass multi surface cleaner 500 ml colin , grinding paste coarse and fine 100 gram , handwash 250 ml bottle , hardener polyurathan paint , hexa blade 12 inchx0.025 inch , hexa frame for 12 inch blade , hose clip by jublee clamp 1 inch , hose clip by jublee clamp 1.5 inch , hose clip by jublee clamp half inch , hose clip by jublee clamp 2 inch , instant adhesive loctite 495 50ml bottle , liquid mild soap 500 ml bottle , locking wire stainless steel 0.032 inch , lps cfc free contact cleaner 312 gram , lps 1 greaseless lubricant 312 gram can , lps 2 heavy duty lubricant 312 gram can , lps 3 rust inhibitor 312 gram can , masking by paper tape 1 inch 50 meter , masking by paper tape 2 inch 50 meter , nyco grease gn 3058 , packing tape 2 inch 50 meter , paint red oil base 100 ml pack , paint spray gun , paint yellow oil base 100 gm pack , pencil brush 0 nos , pencil brush 1 nos , pencil brush 2 nos , pencil brush 3 nos , pencil brush 4 nos , pencil brush 5 nos , pencil brush 6 nos , pencil cell aa duracell , pencil cell aaa duracell , polyurathane paint black thinner base half ltr can , polyurathane paint blue thinner base half ltr can , polyurathane paint grey half liter can thinner base , polyurathane paint red thinner base half liter can , polyurathane thinner for paints , polyurethane paint white half liter can thinner base , polyurethane paint orange half liter can thinner base , quick release cuppling set half inch male female , quick release cuppling set 3 by 8 inch male female , self fusing silicon tape 1 inch 20 ft roll , silicon rubber sheet white 5 mm thick , silicon spray 550 ml can , synthetic rubber adhesive 100 ml can , talcum powder , torch led light 3 cell , valve lapping rubber , water by emery paper 1000 grit sheet , water by emery paper 1500 grit sheet , water by emery paper 500 grit sheet , waxpol rubbing compound green 500 g , wd 40 420 ml can , ziplock bag transparent 13 inchx19 inch 100 pcs , ziplock bag transparent 6 inchx8 inch 100 pcs , ziplock bag transparent 8 inchx12 inch 100 pcs

corporations/Associations/Others

CTN :45328177 Due date: 05 Jun, 202605 Jun, 2026 62.00 Lacs
Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on turnkey basis under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of centralised materials, 11 kv switch gear 600/300/5a 350 mva i/c, 11 kv switch gear 200/100/5a 350 mva o/g, 11 kv 3x300 mm2 xlpecable, 11 kv 3x120 mm2 xlpecable, 24 volt battery, 24 volt battery charger, pcc. 8.5 mtr. long for feeder, 11 kv tpmo switch with fixing clamp, 11 kv top channel, 11 kv dropper angle, earthing complete, stay set complete, 11 kv polymer pin insulator, 11 kv polymer disc insulator, 11 kv disc fiting, 33 kv control panel t/f, acsr weasel conductor, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as join

CTN :45281930 Due date: 05 Jun, 202605 Jun, 2026 NA
Tender For supply of holding clamp for pcc pole 8.5 mtr with n&b , 11 kv f-clamp for pcc pole with n&b , stay clamp 5.5" with n&b , stay insulator with n&b , earth wire clamp with n&b , l. t. m. s. clamp for pcc pole with n&b , l. t. shackle insulator 100* 115 mm with n&b

CTN :45224977 Due date: 01 Jun, 202601 Jun, 2026 29.26 Lacs
Tender For supply of 11 kv stay clamp , 11 kv stay insulator , earth wire clamp , holding clamp , 11 kv f clamp , shackle insulator , nut and bolt , lt clamp , top channel clamp

CTN :45175580 Due date: 23 May, 202623 May, 2026 NA
Tender For supply of v belt , nut 3 by 4 inch , side cutter teeth left , side cutter teeth right , center teeth , teeth with nut and bolt , boom cyl oil seal , shims all types , oil cooler pipe , hyd pipe for boom , jack cyl seal for loader , 9cm lth 1 by 2 cm o d pipe , 1.5 cm hose clips , 24 cm lth corr hose , 12cm lth 3 by 16cm o d pipe , ammeter , clamp jublee no 4 , gasket , key , seal oil , o ring , bearing , bolt joint , cap , ring snap
 Loading, Please wait...

Connect us via What's Up